光學
- High-speed reciprocating high-precision grinding wheel lifting platform for 80 mm lifting stroke (maximum) and 600 min-1 high-speed reciprocating drive (with stroke limit).
- Install a high-precision, high-speed, low-heat spindle (TC-20) for a higher level of mirror machining.
- With the LED specification, compared with the bulb, the LED has a long life, the electricity cost is relatively low, the failure time caused by the bulb damage is shortened, the operation cost is greatly reduced, and the production efficiency is improved.
- The edges of the LED image are sharp, the error discrimination is easy, the processing quality and processing accuracy are improved.
Machine specifications |
||
|
GLS-5P |
GLS-5T |
Control Axis |
4-Axis(Simultaneously 2-Axis) |
|
Reciprocating slide stroke |
0~80mm |
0~155mm |
Reciprocating speed |
30~600 min-1 |
30~400 min-1 |
Radial relief angle/Axial relief angle |
-1~2゜/±3゜ |
-2~20゜/±15゜ |
Wheel spindle speed |
2000~20000 min-1 |
1000~6000 min-1 |
Wheel size(OD×weight×ID) |
φ65~100mm×4~6mm×φ22.23mm |
φ120~180mm×3~10mm×φ31.75mm |
Machine specifications |
|||||
|
GLS-80P |
GLS-80PL |
GLS-150G |
GLS-150GL |
|
Reciprocating slide stroke |
0~80mm |
0~155mm |
|||
Reciprocating speed |
30~600 min-1 |
30~400 min-1 |
|||
Radial relief angle/Axial relief angle |
-1~+-3゜/±2゜ |
-2~20゜/±15゜ |
|||
Wheel spindle speed |
High-speed model(TC-20) |
2000~20000 min-1 |
|||
Low-speed model(TS-6) |
- |
1000~6000 min-1 |
|||
Wheel size(OD×weight×ID) |
High-speed model(Middle path) |
φ65~100mm×4~6mm×φ22.23mm |
|||
Low-speed model(Large path) |
- |
φ120~180mm×3~10mm×φ31.75mm |
The above specifications may vary depending on the manufacturer's modified model, and the specifications at the time of actual price quoted by the company shall prevail. For detailed specifications, please contact us.