全自動超精研機
- The KN-532 and KN-533 machine tools are fully automatic superfinishing machines for machining bearings, which can be connected with the front and rear machining processes to form a fully automatic machining system.
- The machine is 1 meter wide and has a small footprint.
- The swinging part adopts a lightweight design, which makes the stone swing at a high speed without causing a large shake of the machine tool.
- The indexing device is used to drive the support plate, which can feed quickly and accurately.
- The workpiece spindle is lubricated with oil mist to ensure high speed rotation.
|
Machine specifications |
||
|
Machine |
KN-532 |
KN-533 |
|
Maximum diameter |
O.D. φ30～72，I.D. φ24～65 |
O.D. φ15～46，I.D. φ10～35 |
|
Workpiece width |
9～20mm |
|
|
Stone oscillation cycle |
180～1000rpm |
|
|
Stone pressure |
0~4kg/cm2 |
|
|
Grinding time(set by imer) |
Rough (0～10sec) Fine (0～10sec) |
|
|
Workpiece counting |
Outer shoe support roller clamp |
Borer shoe support roller clamp |
|
Workpiece speed |
180～6000rpm |
|
|
Stone oscillation motor |
0.4kw 6P |
|
|
Spindle motor |
1.5kw 4P |
|
|
Coolant pump |
0.25kw 2P |
|
|
Centrifuge |
0.4kw 4P |
|
|
Floor capacity |
1000(mm) x 1050(mm) |
|
|
Weight |
1500kg（excluded coolant tank） |
|
|
Coolant tank |
80L |
|
P.S: The rates in [ ] are options.
The above specifications may vary depending
on the manufacturer's modified model, and the specifications at the time of
actual price quoted by the company shall prevail. For detailed specifications,
please contact us.
